Reducing The Power In Standby Mode (Auto Low Power); Shutting Off Automatically (Auto Shut-Off) - Konica Minolta KM-7145 Instruction Manual

Reducing the Power in Standby Mode (Auto Low Power)

This function automatically lowers the power after a specified period (initially 1 minute)
of copier inactivity. The [POWER SAVER ON/OFF] LED will be lit, the [START] LED will
turn orange to show copier inactivity, and all other LEDs except those of the main
power indicator and operation mode keys will be turned off.
The Auto Low Power function can be set to 1 minute/ 5 minutes/ 10 minutes/
15 minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes
in the Key Operator mode. For the Key Operator setting, see p. 13-43.
If the machine is not being used as a printer or fax, the power will be turned off after 1
minute of copier inactivity, as the Auto Shut-Off function activates at the same time.
To start a copying job, press any key on the control panel or touch the LCD screen.
The Auto Low Power will be released and the LCD screen recovers brightness.
• If the Auto Shut-Off function activates at the same time, the power will be
• The LCD screen will not become dark during a duplex copying job or

Shutting Off Automatically (Auto Shut-Off)

This function automatically shuts off the power
after a specified period (15 minutes) of copier
inactivity.
The [POWER SAVER ON/OFF] LED will be lit. All
other LEDs and the LCD screen will be turned off.
To start a copying job, press [POWER SAVER
ON/OFF].
Copying will become available.
• The Auto shut-off can be set for 1 minute/ 5 minutes/ 10 minutes/ 15
• When "Timer interrupt mode / Enter password" is displayed after pressing
2-20
Turning On the Power Switch (continued)
turned off without the LCD screen becoming dark.
when the Jam Position Screen is displayed.
minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes
in the Key Operator mode. For the Key Operator setting, see p. 13-43.
[POWER SAVER ON/OFF], see p. 7-2 and follow the procedure to
continue.