Reducing The Power In Standby Mode (Auto Low Power); Information; Shutting Off Automatically (Auto Shut-Off) - Konica Minolta 7020 Instruction Manual

Turning On the Main Power Switch and Power Switch (continued)
I Reducing the Power in Standby Mode (Auto Low Power)
This function automatically lowers the power after a
specified period (initially 15 minutes) of copier inactiv-
ity. The LCD screen becomes dark with the message
"Low Power Mode / Press any key to cancel" displayed.
To start a copying job, press any key on the control
panel. The Auto low power will be released and the LCD
screen recovers usual brightness.
I Shutting Off Automatically (Auto Shut-Off)
This function automatically shuts off the power after a
specified period (initially 15 minutes) of copier inactiv-
ity.
To start a copying job, press the power switch. The copy-
ing operation will become available.
HINTS
The Auto low power function
can be set to 5 minutes/ 10
minutes/ 15 minutes/ 30 min-
utes/ 60 minutes/ 90 minutes/
120 minutes/ 240 minutes in
the Key operator mode.
For the key operator setting,
see p. 12-34.
• If the Auto shut-off function
activates at the same time,
the power will be turned off
without the LCD screen be-
coming dark.
• The LCD screen will not be
come dark during a duplex
copying job or when the Jam
Position Screen is displayed.
HINTS
The Auto shut-off can be set
for 15 minutes/ 30 minutes/ 60
minutes/ 90 minutes/ 120 min-
utes/ 240 minutes in the Key
operator mode.
For the key operator setting,
see p. 12-34.
When "Timer interrupt mode /
Enter password" is displayed
after pressing the power
switch, see the following page
to continue.
2
Machine

Information

Machine
Configuration
Turn On/Off
the Power
Touch
Screens
Loading
Paper
Changing
Paper Size
2-9