Reducing The Power In Standby Mode (Auto Low Power); Shutting Off Automatically (Auto Shut-Off) - Konica Minolta 7085 Instruction Manual

Reducing the Power in Standby Mode (Auto Low Power)

This function automatically lowers the power after a specified period (initially 15
minutes) of copier inactivity. The LCD screen becomes dark with the message "Low
Power Mode / Press any key to cancel" displayed.
The Auto Low Power function can be set to 5 minutes/ 10 minutes/ 15
minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes
in the Key Operator mode. For the Key Operator setting, see p. 13-38.
To start a copying job, press any key on the control panel.
The Auto low power will be released and the LCD screen recovers usual brightness.
• If the Auto Shut-Off function activates at the same time, the power will
• The LCD screen will not be come dark during a duplex copying job or

Shutting Off Automatically (Auto Shut-Off)

This function automatically shuts off the power after a specified period (initially 90
minutes) of copier inactivity.
To start a copying job, press [POWER SAVER ON/OFF].
The copying operation will become available.
• The Auto shut-off can be set for 30
• When "Timer interrupt mode / Enter
2-20
Turning On the Power Switch (continued)
HINT
DETAILS
be turned off without the LCD screen becoming dark.
when the Jam Position Screen is displayed.
HINTS
minutes/ 60 minutes/ 90 minutes/ 120
minutes/ 240 minutes in the Key Opera-
tor mode. For the Key Operator setting,
see p. 13-38.
password" is displayed after pressing
[POWER SAVER ON/OFF], see p. 7-2
and follow the procedure to continue.
INTERRUPT
POWER SAVER
PROOF COPY
STOP
TY. START
TIMER
ON / OFF