Table of Contents
Advertisement
[10] Control Panel Adjustment
Use this feature to check the LCD touch screen and realign the position of the touch
sensor that may have shifted.
Key Operator Mode Screen
Procedure
1 Touch [10] Control panel adjustment on the Key Operator Mode Screen to
display the Control Panel Adjustment Screen.
2 Touch the "+" symbol at the upper right corner, then lower left corner on the
screen. The present coordinates will be displayed in the message area of the
screen.
3 Check that the X coordinate and Y coordinate displayed in the first line of the
message area fall within the standard value displayed in the second line.
4 Touch the CHECK BUTTONs at the upper left and lower right corners on the
screen to check if the buzzer tone functions normally.
5 If the coordinates fall out of the range of the standard value in step 3, or the
buzzer tone does not sound in step 4, repeat the adjustment procedure from 2 to
4 or contact your service representative.
6 Press [1] of the control panel keypad to restore the Key Operator Mode Screen.
[10] Control Panel Adjustment
Control Panel Adjustment Screen
14-35
Hide quick links:
Advertisement
Table of Contents
