Control Panel Adjustment - Konica Minolta 7085 Instruction Manual

[10] Control Panel Adjustment

Use this feature to check the malfunction of the LCD touch screen due to the shift in
position of the touch sensor.
Key Operator Mode Screen
Procedure
1 Touch [10] Control panel adjustment on the Key Operator Mode Screen to display the
Control Panel Adjustment Screen.
2 Touch the "+" indication at the upper right corner, then lower left corner on the screen.
The present coordinates will be displayed in the message area of the screen.
NOTE:
When touching the "+" indications, it is recommended that you use a sharp
point such as a pencil to be much more accurate.
3 Check that the X coordinate and Y coordinate displayed in the first line of the message
area fall within the standard value displayed in the second line.
4 Touch the CHECK BUTTONs at the upper left and lower right corners on the screen to
check if the buzzer tone functions normally.
5 If the coordinates fall out of the range of the standard value in step 3, or the buzzer tone
does not sound in step 4, repeat the adjustment procedure from 2 to 4.
6 Press [0] to write the new data, or press [1] to restore the Key Operator Mode Screen.
7 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13-36
Control Panel Adjustment Screen