How To Access The Ekc Setting Mode - Konica Minolta 7085 Instruction Manual

[4] E.K.C. (Electronic Key Counter) Function Setting (continued)

How to Access the EKC Setting Mode

Key Operator Mode Screen
Procedure
1 Touch [4] E.K.C. function setting on the Key Operator Mode Screen. The EKC Master
Key Code Screen displays, if a code is required.
2 Use the keypad on the touch screen to enter your 8-digit EKC master key code, then
touch OK to display the EKC Setting Menu Screen. (See note.)
3 Select the desired EKC function, and make settings, as required.
To exit the EKC mode, touch PREVIOUS SCREEN on the EKC Setting Menu Screen.
4 To exit the Key Operator mode, touch PREVIOUS SCREEN on the Key Operator Mode
Screen to restore the Basic Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid
8-digit code. The EKC master key code can be set to less than 8 digits by
the Memory switch setting of the Key Operator function.
13-16
EKC Master Key Code Screen
EKC Setting Menu Screen