How To Access The Ecm Setting Mode - Konica Minolta 7045 User Manual

Key Operator Mode
ECM (Electronic Copy Monitor) [4] (continued)

How to Access the ECM Setting Mode

Key Operator Mode Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen. (See note 1.)
If the key operator password is not valid, check with your service representative.
2 Touch
4. E.C.M.
3 Use the keypad on the touch screen to enter your 8-digit ECM master key code, then
touch to display the ECM Setting Menu Screen. (See note 2.)
OK
4 Select the desired ECM function, and make settings, as required.
To exit the ECM mode, touch
5 To exit the Key Operator mode, touch
restore the Basic Screen.
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
11-20 Key Operator Mode
ECM Master Key Code Screen
The ECM Master Key Code Screen displays, if a code is required.
RETURN
Key-Ope mode
to display the Key Operator
OK
on ECM Setting Menu Screen.
on the Key Operator Mode Screen to
RETURN
ECM Setting Menu Screen
.