Virtual Extension Key Enhanced Options - NEC SL2100 Programming Manual

ISSUE 2.0
Program 15 : Extension, Basic Setup

15-18 : Virtual Extension Key Enhanced Options

Level:
IN
Description
Use Program 15-18 : Virtual Extension Key Enhanced Options to define the operation when a
Virtual Extension Key is pressed.
Input Data
Extension Number including Virtual Extensions
Item Item
No.
01 Virtual Extension
Key Operation
Mode
02 Display mode
when placing a
call on Virtual
Extension Key
03 Show CLI
04 Show Internal
Caller Informa-
tion
05 One Ring
Programming Manual
Input Data
0 = Release Define if calls to a Virtual Extension
1 = Land on the key Key land on the Virtual or on the ex-
tension/CO appearance.
0 = Secondary Exten- Defines if calls to or from a Virtual
sion Name Extension Key display the Virtual
1 = Actual Station Extension Key name or the name of
Name the extension it resides on.
0 = No CLI info When set to a 0, the caller ID of a
1 = Show CLI info trunk call/station call pointed to a vir-
tual extension will not be displayed if
the virtual extension is not set to
ring. When set to a 1, the caller ID
of a trunk call pointed to a virtual ex-
tension will be displayed if the virtual
extension is not set to ring. Station
calls to a virtual that is not assigned
to ring will display the station name
or number if PRG 15-18-04 is set to
a 1.
0 = Do Not Show When set to a 0, internal calls to the
1 = Show virtual extension will not show the
name or number of the extension
that is calling.
When set to 1, internal calls to the
virtual extension will show the name
or number of the extension that is
calling if the virtual is assigned to
ring or if PRG 15-18-03 is set to a 1.
0 = Normal Ring Cycle When set to a 0, the virtual exten-
1 = One Ring sion follows the normal ring cycle.
When set to a 1, the virtual exten-
sion will only ring one time (the virtu-
al extension must be first set to ring
in PRG 15-08).
Up to eight digits
Description
This is assigned for the Virtual
Extension Key, not the extension
it resides on.
SL2100
Default Related
Program
0 20-04-01
0
0 15-09-01
0 15-09-01
15-18-03
0 15-09-01
2-167
Program
15