To Add A Programmable Key As A Speed Dial Key With A Personal Directory Entry Using The Feature Key - NEC DT900 Series User Manual

7
8
9
10
To add a Programmable Key as a Speed Dial Key
with a Personal Directory entry using the Feature Key
1
2
•
•
3
DT900/DT900S Series Phone User Guide
You can also press the Cancel softkey to return to the previous screen.
1
Select Do Not Show in Directory and press the OK softkey.
You can also press the Cancel softkey to return to the previous screen.
Press the Save softkey to save the entry.
If the Speed Dial number is already used for another entry, you will see an error when
you try to save the entry.
To change the Speed Dial Key number for the entry, select
new Speed Dial Key number.
A confirmation displays, telling you the speed dial has been updated. Press Enter
the cursor pad or the OK softkey.
To return to the main phone screen, press the Exit softkey or the Feature key.
S P E E D D I A L K E Y S W I T H P E R S O N A L D I R E C T O R Y E N T R I E S
To program a Speed Dial Key that will also show up in your Personal Directory, you
can define the Speed Dial Key number when you are setting up the Personal
Directory entry, or set it up using the Feature Key and select to show the entry in the
Personal Directory.
The Speed Dial information will be listed in the Personal Directory similar to all other
Personal Directory entries, and you can also view the entry information using the
Feature Key.
Enter the programmable mode for your phone. The Feature key LED lights a steady red.
Do one of the following:
ITK-6D/12D Phones:
Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
ITK-8LD and ITK-8LCG Phones:
Press the Scroll Key to scroll to the desired page, then press the Speed Dial Key that you
want to edit. The programmable key LED flashes, and the Speed Dial information for the
key is shown.
If the Speed Dial has already been programmed, the name and number
Note:
information displays. You will need to press the Exit softkey and select another
programmable key.
Use the telephone keypad to enter the name and press Enter
OK softkey.
Up to 24 characters may be entered for the name.
• Press the Delete softkey to delete the last character entered, or press the
Cancel softkey to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
• To add a space to an entry, press
S P E E D D I A L A N D P R O G R A M M A B L E K E Y S
3
Speed Dial and enter a
b
on the cursor pad or the
*
key on the keypad.
#
.
b
on
7-77