Sending Content To Legacy Endpoints In Telepresence Mode - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag Values
Layout
4 Click OK.
The flag is updated in the MCMS_PARAMETERS list.
5 Click OK.
For flag changes (including deletion) to take effect, reset the MCU. For more information see
Resetting the Collaboration Server

Sending Content to Legacy Endpoints in Telepresence Mode

The Collaboration Server can be configured to manage the layouts of to H.323/SIP/ISDN endpoints that do
not support H.239 Content (legacy endpoints) over the video (people) channel in Telepresence conferences
when Content is being sent.
For more information, see
Polycom®, Inc.
Flag Value
CP_LAYOUT_1P7
CP_LAYOUT_1P8UP
CP_LAYOUT_1P8CENT
CP_LAYOUT_1P8HOR_UP
CP_LAYOUT_3X3
CP_LAYOUT_2P8
CP_LAYOUT_1P12
CP_LAYOUT_4X4
.
Sending Content to Legacy Endpoints in Telepresence Conferences
167