Polycom RealPresence 800s Administrator's Manual page 202

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
To select the lecturer and enable the Lecture Mode while starting the conference:
● In the Conference Properties - Participant dialog box, enable the Lecture Mode in one of the
following methods:
Selecting a defined participant:
a Add participants to the conference either from the Address book or by defining new participants.
b In the Lecturer field, select the lecturer from the list of the defined participants.
Automatic selection of the lecturer:
 In the Lecturer field, select [Auto].
In this mode, the conference speaker becomes the lecturer.
To select the lecturer and enable the Lecture Mode during the ongoing conference:
1 Make sure that the participant you want to designate as the lecturer has connected to the
conference.
2 In the Conference Properties - Video Settings dialog box, in the Lecturer field, select the lecturer
from the list of the connected participants.
Polycom®, Inc. 216