Substituting E.164 Number In Dial String - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
New Participant - Advanced (Continued)
Field
Cascaded (IP Only)
Precedence Domain
Name
(Dial-out SIP Only)
Precedence Level
(Dial-out SIP Only)
AGC
6 To add general information about the participant, such as e-mail, company name, and so on, click
the Information tab and type the necessary details in the Info 1-4 fields. Text in the info fields can
be added in Unicode format (length: 31 characters).
7 Click OK.
The new participant is added to the selected group in the address book.

Substituting E.164 Number in Dial String

Between the time a conference is scheduled and when it becomes active, the IP of an endpoint may change,
especially in an environment that uses DHCP. The MCU can be set to ignore the IP address of a participant
when the conference starts. Instead, the alternative E.164 number will be used.
The flag, REMOVE_IP_IF_NUMBER_EXISTS controls this option. This flag must be manually added to
change its value. The values of this flag are:
● YES (default) - The IP address of an endpoint will be ignored.
● NO - The IP address of an endpoint will be used.
Guidelines for Substituting E.164 Number in Dial String
● When this feature is enabled, the IP address field of participants in scheduled conferences and
conference templates will be empty.
● In order for the MCU to ignore the IP of H.323 participants, the following requirements must be met:
 A gatekeeper must be defined.
 The alias of the participant must be defined.
 The alias type must be defined (not set to None).
Polycom®, Inc.
Description
If this participant is used as a link between conferences select:
• Slave, if the participant is defined in a conference running on a Slave MCU.
• Master, if the participant is defined in a conference running on the Master
MCU.
It enables the connection of one conference directly to another conference using
an H.323 connection only. The conferences can run on the same MCU or
different MCU's. For more information, see
Link .
When Multi Level Precedence and Preemption is used, this is the Precedence
Domain Name for the participant.
For more information see
When Multi Level Precedence and Preemption is used, this is the Precedence
Level for the participant
For more information see
The Audio Gain Control (AGC) protocol that reduces noises is enabled by
default for the participants.
Clear this check box to disable the AGC feature.
Basic Cascading using IP Cascaded
MLPP (Multi Level Precedence and Preemption)
MLPP (Multi Level Precedence and Preemption)
.
.
262