H.264 Auto Selection (Avc Cp Conferences); Avc Cp Conferences); Hd (Avc Cp Default) - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
H.263 & H.264 Auto Selection (AVC CP Conferences)
This option should be selected when Content is to be shared using a mix of H.263-supporting and
H.264-supporting endpoints. (In versions up to and including 7.6, this is named Up to H.264.)
Bit rate allocation to the Content channel by the Collaboration Server is dynamic according to the
conference line rate and Content Setting selected for the conference.
If an endpoint that supports only H.263 for Content Sharing connects to a conference with Content Protocol
set to H.263 & H.264 Auto Selection:
● Content is shared using H.263 even if H.264-supporting endpoints are connected.
● Content is shared using H.264 if all connected endpoints have H.264 capability.
● If the first endpoint to connect to the conference only supports H.263, the H.263 protocol is used for
Content for all conference participants.
● If Content is already being shared using the H.264 protocol when a H.263 endpoint connects, Content
sharing is stopped and must be manually restarted using H.263 (i.e. the endpoint using H.263
Content Protocol must connect first), for all participants to receive content. If the H.263 endpoint
disconnects, Content sharing must be manually stopped and restarted and will automatically upgrade
to the H.264 protocol.
● Endpoints that do not have at least H.263 capability can connect to the conference but cannot share
Content.
● This option is not available in SVC Conferencing Mode and CP and SVC Conferencing Mode
(applicable to AVC endpoints only).
H.263 (AVC CP Conferences)
Select this option when most of the endpoints support H.263 and some endpoints support H.264. In such a
case, all endpoints will share content using the H.263 protocol, and this protocol will not change throughout
the conference (fixed mode).
Bit rate allocation to the Content channel by the Collaboration Server is dynamic according to the
conference line rate and Content Settings selected for the conference. For more information see
Sharing Parameters in Content Highest Common (Content Video Switching) Mode
This option is not available in SVC Conferencing Mode and CP and SVC Conferencing Mode.
H.264 HD (AVC CP default)
The H.264 HD option should be selected only if most endpoints in the conference support H.264 to ensure
high quality Content.
When this protocol option is selected, endpoints must connect at Content bit rates above a minimum as
specified by specific System Flags to ensure high quality Content for all participants. For more information
about System Flags see
Bit rate allocation to the Content channel by the Collaboration Server is dynamic according to the
conference line rate and Content Setting selected for the conference. For more information see
Sharing Parameters in Content Highest Common (Content Video Switching) Mode
Endpoints that do not support H.264, or those that do not meet the minimum line rate threshold for the
Content Setting along with ISDN endpoints, are connected as Legacy Endpoints and receive content
through their video channel will not receive content. If the Send Content to Legacy Endpoints selection is
disabled, these endpoints will not receive content.
Polycom®, Inc.
Setting the Minimum Content Rate for Each Content Quality Setting for H.264 HD
Content
.
Content
.
144
.