Sending Configuration Statistics Via E-Mail; Figure 6-6 E-Mail Report - Polycom KIRK 8000 Configuration Manual

Polycom KIRK Wireless Server 8000 Configuration Guide

Sending Configuration Statistics via E-mail

30
You can send the Configuration statistics to Polycom via e-mail. However,
before you can do so you have to fill in information the e-mail tab.
Figure 6-6 E-mail Report
To specify E-mail Report Information
On the E-mail Report tab, enter your company information in the
1
Company info pane.
In the E-mail info pane specify from which e-mail account you want to
2
send the statistical information.
From the Status Mail Timing list, select how often you want to send the
3
status mail. The default setting is Disabled.
In the SMTP Port field, enter the port used for incoming mail.
4
In the SMTP Address field enter the IP address of the SMTP server.
5
In the SMTP User field enter the user name if required by the SMTP
6
server.
In the Reply Address field enter the e-mail address to which the report
7
recipient can reply.
In the Recipient Address field type kws8000statistics@polycom.com.
8
In the Carbon Copy fields enter the e-mail addresses of any other
9
recipients to which you want to send a copy of the report.
10 Click the Send configuration statistics via E-mail button to send the
report.
11 If the outgoing mail server uses SMTP authentication, click the Write
SMTP Password button, or type the password.
Statistics
Polycom, Inc.