Polycom RealPresence 800s Administrator's Manual page 613

Collaboration server virtual edition administrator’s guide
Hide thumbs Also See for RealPresence 800s:
Table of Contents

Advertisement

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Manually Added, Modified, Deleted System Flags
Flag
AVOID_VIDEO_LOOP_BACK_IN
_CASCADE
BLOCK_CONTENT_LEGACY_F
OR_LYNC
CAC_ENABLE
CASCADE_LINK_PLAY_TONE_
ON_CONNECTION
CELL_IND_LOCATION
Polycom®, Inc.
Description
When set to YES the current speaker's image is not sent back through
the participant link in cascaded conferences with conference layouts
other than 1x1.
Default: YES
Range: YES / NO
This flag is used to control the system behavior in an environment
where some Lync clients use the Polycom CCS plug-in and some do
not.
When set to NO (default), Content is sent to all Lync clients over the
video channel, including those with the plug-in installed, even when the
Send Content to Legacy Endpoints is disabled. Other, non-Lync legacy
endpoints will not be affected by this flag and will receive content
according to the Send Content to Legacy Endpoints settings in the
conference Profile.
When set to YES, Content is not sent to Lync clients over the video
channel including those with the Polycom CCS plug-in installed, even
when the Send Content to Legacy Endpoints is enabled. Other,
non-Lync legacy endpoints will not be affected by this flag and will
receive content according to the Send Content to Legacy Endpoints
settings in the conference Profile.
When set to YES, enables the Call Admission Control implementation
in the Collaboration Server.
Default: NO (CAC is disabled)
When set to YES, the RealPresence Collaboration Server plays a tone
when a cascading link between conferences is established. The tone is
played in both conferences.
This tone is not played when the cascading link disconnects from the
conferences.
The tone used to notify that the cascading link connection has been
established cannot be customized.
Default value: NO.
The tone volume is controlled by the same flag as the IVR messages
and tones: IVR_MESSAGE_VOLUME.
Change the location of the display of Network Quality Indicators
displayed in the cells of the conference Video Layout.
Default: TOP_RIGHT
Range:
BOTTOM_LEFT
BOTTOM_RIGHT
TOP_LEFT
TOP_RIGHT
627

Advertisement

Table of Contents
loading

Table of Contents