Polycom RealPresence 800s Administrator's Manual page 626

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Manually Added, Modified, Deleted System Flags
Flag
REMOVE_H323_EPC_CAP_TO_
NON_POLYCOM_VENDOR
REMOVE_H323_HIGH_PROFILE
_CAP_TO_NON_POLYCOM_VE
NDOR
REMOVE_H323_HIGH_QUALITY
_AUDIO_CAP_TO_NON_POLYC
OM_VENDOR
REMOVE_H323_LPR_CAP_TO_
NON_POLYCOM_VENDOR
REMOVE_IP_IF_NUMBER_EXIS
TS
RFC2833_DTMF
RMX_MANAGEMENT_SECURIT
Y_PROTOCOL
RTCP_FIR_ENABLE
Polycom®, Inc.
Description
Used to disable EPC protocol. Use of Polycom's proprietary protocol,
High Profile, EPC, may result in interoperability issues when used with
other vendors' endpoints.
Possible values: YES / NO
Default: NO
Used to disable High Profile protocol. Use of Polycom's proprietary
protocol, High Profile, may result in interoperability issues when used
with other vendors' endpoints.
Possible values: YES / NO
Default: NO
Used to disable the following Audio Codecs:
• G7221C
• G7221
• Siren22
• Siren14
Possible values: YES / NO
Default: NO
Used to disable H.323 LPR protocol. Use of Polycom's proprietary
protocol, H.323 LPR, may result in interoperability issues when used
with other vendors' endpoints.
Possible values: YES / NO
Default: NO
Between the time a conference is scheduled and when it becomes
active, the IP of an endpoint may change, especially in an environment
that uses DHCP. This flag determines if the E.164 number is to be
substituted for the IP address in the dial string.
Range: YES / NO
Default: YES - The IP address will be substituted with the E.164
number.
Controls the receipt of in-band and out-of-band DTMF Codes. When
set to:
• YES The RMX will receive DTMF Codes sent in-band.
• NO The RMX receive DTMF Codes sent out-of-band.
The RMX always sends DTMF Codes in-band (as part of the Audio
Media stream).
Range: YES/NO
Default YES
Enter the protocol to be used for secure communications.
Default: TLSV1_SSLV3 (both).
When set to YES, the Full Intra Request (FIR) is sent as INFO (and not
RTCP).
Default = YES
640