Resetting The Collaboration Server 800S; Resetting The Realpresence Collaboration Server Virtual Edition - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide

Resetting the Collaboration Server 800s

These instructions are applicable to the RealPresence Collaboration Server 800s only.
System Reset saves system configuration changes and restarts the system with the latest settings.
To reset the RMX:
1 In the RMX Management pane, click the Hardware Monitor button.
The Hardware Monitor pane is displayed.
2 Click the Reset (
When the Collaboration Server system is reset, during Collaboration Server startup the Progress Bar
appears at the bottom of the Collaboration Server Status pane, displaying the amount of time
remaining for the reset process to complete:
The Startup progress is also indicated by a green bar moving from left to right.
The duration of the Startup depends on the type of activity that preceded the MCU reset. For
example: Fast Configuration Wizard, New Version installation, Version Upgrade, Restore Last
Configuration etc.
Resetting the RealPresence Collaboration Server
Virtual Edition
To restart the MCU instance:
1 Click Start > Programs.
a If the VMware vSphere Client is displayed in the recently used programs list, click VMware
vSphere Client in the list to start the application.
or
b Click All Programs > VMware > VMware vSphere Client.
Polycom®, Inc.
) button.
583