Polycom RealPresence 800s Administrator's Manual page 99

Collaboration server virtual edition administrator’s guide
Hide thumbs Also See for RealPresence 800s:
Table of Contents

Advertisement

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
6 Define the following supported parameters:
New SVC Profile - Advanced Parameters
Field/Option
Encryption
Auto Terminate
Exclusive Content
Mode
FW NAT Keep Alive
Interval
7 Click the Video Quality tab.
Polycom®, Inc.
Description
Select the Encryption option for the conference:
Encrypt All - Encryption is enabled for the conference and all conference
participants must be encrypted.
No Encryption - Encryption is disabled for the conference.
Encrypt when Possible - enables the negotiation between the MCU and the
endpoints and let the MCU connect the participants according to their
capabilities, where encryption is the preferred setting. For connection guidelines
see
Mixing Encrypted and Non-encrypted Endpoints in one Conference
For more information, see
Conferences
.
When selected (default), the conference automatically ends when the termination
conditions are met:
Before First Joins — No participant has connected to a conference during the
n minutes after it started. Default idle time is 10 minutes.
At the End - After Last participant Quits — All the participants have
disconnected from the conference and the conference is idle (empty) for the
predefined time period. Default idle time is 1 minute.
At the End - When Last Participant Remains — Only one participant is still
connected to the conference for the predefined time period (excluding the
recording link which is not considered a participant when this option is selected).
It is not recommended to select this option for SVC Conferences. Default idle
time is 1 minute.
When selected, Content broadcasting is limited to one participant preventing other
participants from interrupting the Content broadcasting while it is active. For more
details, see
When selected, a FW NAT Keep Alive message is sent at an interval defined in the
field below the check box.
The time in seconds between FW NAT Keep Alive messages.
Packet Loss Compensation (LPR and DBA) AVC CP
.
113

Advertisement

Table of Contents
loading

Table of Contents