Configuring The Collaboration Server - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Supported Polycom products
Polycom TIP and SIP
Polycom DMA 7000 system
Polycom RealPresence Collaboration Server (RMX) 2000 and
RealPresence Collaboration Server (RMX) 4000 systems
Immersive Telepresence Systems:
• RPX 200 and 400 systems
• OTX 300 system
• TPX HD 306 system
• ATX HD 300 system
HDX Systems:
• 7000 HD Rev C
• 8000 HD Rev B
• 9006
• 4500
The following Polycom peripheral:
• Polycom Touch Control
SIP ONLY (no TIP support)
Spectralink wireless phones 8020/8030
Polycom VVX 1500
Polycom VVX 1500 C
KIRK Wireless Server 300/600v3/6000
The following procedures 1 -16 are a summary of the configuration procedures.
The detailed procedures 1 - 16 begin with
System Flag.

Configuring the Collaboration Server

1 Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag
2 Configuring the Collaboration Server to statically route outbound SIP calls to DMA or CUCM
3 Configuring the Collaboration Server's H.323 Network Service to register with CMA gatekeeper
4 Configuring a TIP enabled Profile on the Collaboration Server
5 Configuring an Ad Hoc Entry Queue on the Collaboration Server if DMA is not used
6 Configuring a Meeting Room on the Collaboration Server
7 Configuring Participant Properties for dial out calls
Polycom®, Inc.
Version(s)
V4.0
V7.6 and higher
V3.0.3
Requires TIP option key.
Requires Polycom Touch Control.
V3.0.3
Requires TIP option key.
1.3.0
Version(s)
V4.0
V3.3.1
Procedure 1: Set the MIN_TIP_COMPATIBILITY_LINE_RATE
832