Polycom RealPresence 800s Administrator's Manual page 862

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
5 In the Initial Setup Utility window, click the Restore to Factory Defaults link.
The Restore to Factory Security Defaults dialog box is displayed.
6 Recommended: Click the Lan Configuration check box and modify the following parameters in
the utility's dialog box using the information supplied by your network administrator.
 Control Unit IP Address
 Subnet Mask
 Default Router IP Address
The restore to Factory Defaults removes the Management Network Service. If the above fields
addresses are not set, the Control Unit IP Address of the Management Network Service will be
192.168.1.254.
Polycom®, Inc. 876