Polycom RealPresence 800s Administrator's Manual page 600

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
4 In the New Value field, enter the flag's new value.
5 Click OK to close the Update Flag dialog box.
6 Repeat steps 2–4 to modify additional flags.
7 Click OK to close the System Flags dialog box.
For flag changes (including deletion) to take effect, reset the MCU. For more information see
Resetting the Collaboration Server
MCMS_PARAMETERS_USER Flags
Flag
ALLOW_NON_ENCRYPT_PART
Y_IN_ENCRYPT_CONF
CHANGE_AD_HOC_CONF_DUR
ATION
CONTENT_SLAVE_LINKS_INTR
A_SUPPRESSION_IN_SECOND
S
Polycom®, Inc.
(RMX).
Description
If YES, allows non-encrypted participants to connect to encrypted
conferences.
Default: No
The duration of an ad-hoc conference* can be configured on a system
level by setting the flag to one of the following values (in minutes): 60
(default), 90, 180 and 270.
* An ad-hoc conference is automatically created when the participant
dials into an Ad-hoc Entry Queue and enters a conference ID that is
not being used by any other conferencing entity. It is based on the
Conference Profile assigned to the EQ.
Defines the interval, in seconds, during which the Collaboration Server
is allowed to forward an Intra Request received from any of the Slave
Cascading Links. The Slave Cascading Link can be connected to the
local Collaboration Server, to an MCU on a higher cascade level or to
the Content sharer.
The first Intra request that is received from any of the Slave MCUs
connected to the Collaboration Server starts the interval counter and is
forwarded to the next level MCU or to the Content sharer.
All other Intra requests that are received within this interval are
registered but ignored. After an interval of <flag value> seconds, the
system checks if during the last interval any additional Intra requests
were registered. If there is at least one Intra request it will be
forwarded. If there is no additional Intra request not no action is taken
other than to wait for the next cycle.
This filtering process is repeated every <flag value> seconds.
Default: 30
614