Signaling Monitor; Conferencing; Defining Avc Dial Out Participants - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
In the IP Network Services table, the system lists all the defined Network Services (one or several
depending on the system configuration).
● To register the conferencing entity to which this profile is assigned to a Network Service, in the
Registration column click the check box of that Network Service.
● You can also prevent dial in participants from connecting to that conferencing entities when
connecting via a Network Service.
In the Accept Calls column, clear the check box of the Network Service from which calls cannot
connect to the conference.

Signaling Monitor

The Signaling Monitor pane includes the list of the signaling and media IP Network Services defined in the
system (up to three in the RealPresence Collaboration Server 800s/Virtual Edition). Double-clicking a
Network Service, displays it properties and status.

Conferencing

Each conference on the Collaboration Server can host participants from the different IP Network networks
simultaneously.

Defining AVC Dial Out Participants

When defining AVC dial out participants, you can select the Network Service to place the call according to
the network to which the endpoint pertains. If the endpoint is located on a network other than the selected
network, the participant will not be able to connect.
If no Network is selected, the system uses the default IP Network Service.
If no Network is selected, the system uses the IP Network Service selected for reserving the conference
resources, and if none is set for the conference it uses the Network Service set as default.
The IP Network Service is selected in the New Participant - Advanced dialog box.
Polycom®, Inc. 445