Polycom RealPresence 800s Administrator's Manual page 612

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
3 In the Value field enter the flag value.
The flags in the Manually Added, Modified, Deleted System Flags table can be manually added
to the
MCMS_PARAMETERS_USERS tab.
4 Click OK to close the New Flag dialog box.
The new flag is added to the flags list.
5 Click OK to close the System Flags dialog box.
For flag changes (including deletion) to take effect, reset the MCU. For more information see
Resetting the Collaboration
:
Manually Added, Modified, Deleted System Flags
Flag
802_1X_CERTIFICATE_MODE
802_1X_SKIP_CERTIFICATE_VA
LIDATION
802_FIPS_MODE
ACCEPT_VOIP_DTMF_TYPE
ANAT_IP_PROTOCOL
APACHE_KEEP_ALIVE_TIMEOU
T
Polycom®, Inc.
Server.
Description
Not supported with RealPresence Collaboration Server 800s/Virtual
Edition.
Not supported with RealPresence Collaboration Server 800s/Virtual
Edition.
Not supported with RealPresence Collaboration Server 800s/Virtual
Edition.
Defines the type of DTMF tones (inband) or digits (outband) that the
Collaboration Server will accept in VOIP calls.
Range:
• 0 - Auto (default):
Inband or outband DTMF tones/digits are accepted depending on
the endpoint's current setting. If the endpoint switches from inband
to outband or visa versa the value of the
SET_DTMF_SOURCE_DIFF_IN_SEC flag determines the time
interval after which both inband and outband tones/digits will be
accepted.
• 1 - Outband (H.245) only
• 2 - Inband only
If YES, enables Alternative Network Address Types.
Range: DISABLED, AUTO, PREFER_IPv4, PREFER_IPv6
• Default: YES
If the connection is idle for longer than the number of seconds specified
by this flag, the connection to the Collaboration Server is terminated.
Value: 0 - 999
Default: 15
Note: A value of 0 results in an unlimited keep-alive duration.
626