Polycom RealPresence 800s Administrator's Manual page 246

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
New Participant - General (Continued)
Field
Endpoint Website
IP Address
(IP only)
Audio Only
Extension/Identifier
String
Extension/Identifier
String
4 Usually, additional definitions are not required and you can use the system defaults for the
remaining parameters. In such a case, click OK.
To modify the default settings for advanced parameters, click the Advanced tab.
5 Define the following Advanced parameters:
Polycom®, Inc.
Description
Enter the IP address of the endpoint's internal site to enable connection to it for
management and configuration purposes.
This field is automatically completed the first time that the endpoint connects to the
Collaboration Server. If the field is blank it can be manually completed by the system
administrator. The field can be modified while the endpoint is connected
Select this check box to define the participant as a voice participant, with no video
capabilities.
Dial-out participants that connect to an external device such as Cascaded Links or
Recording Links may be required to enter a conference password or an identifying
string to connect. Enter the required string as follows:
[p]...[p][string]
For example: pp4566#
p - optional - indicates a pause of one second before sending the DTMF string. Enter
several concatenated [p]s to increase the delay before sending the string. The
required delay depends on the configuration of the external device or conference IVR
system.
String - enter the required string using the digits 0-9 and the characters * and #. The
maximum number of characters that can be entered is identical to the H.323 alias
length.
If the information required to access the device/conference is composed of several
strings, for example, the conference ID and the conference password, this information
can be entered as one string, where pauses [p] are added between the strings for the
required delays, as follows:
[p]...[p][string][p]...[p] [string]...
For example: p23pp*34p4566#
The Collaboration Server automatically sends this information upon connection to the
destination device/conference. The information is sent by the Collaboration Server as
DTMF code to the destination device/conference, simulating the standard IVR
procedure.
260