Polycom RealPresence 800s Administrator's Manual page 837

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Component Version
ASR (Cisco SBC) 100x
Polycom Equipment
DMA 6.0.0_ATT_B
uild_25
Collaboration 8.1.1
Server
MLA Server 3.0.5
HDX and ITP 3.1.1.1
Endpoints
Microsoft
Lync 2010 4.0.7577.183
CU4
Lync 2010 client 4.0.7577.405
1 CU4
Exchange 2007 8.3.213.1
R2 SP3
Exchange 2010 14.2.247.5
SP2
Outlook 2007 12.0.6557.50
01 SP2
Polycom®, Inc.
Description
The Cisco Aggregation Services Routers (ASR) Series includes Cisco IOS
XE Software Internetwork Operating System - Gatekeeper.
It controls and manages real-time multimedia traffic flows between IP/SIP
network borders, handling signaling, data, voice, and video traffic.
Polycom Distributed Media Application
• DMA is an optional component but is essential if Content sharing is to be
enabled.
• All SIP endpoints register to DMA as a SIP Proxy.
• DMA should be configured to route SIP calls (with CTS destination) to
CUCM.
• DMA can be configured with a VMR (Virtual Meeting Room). Incoming
calls are then routed to the Collaboration Server.
MCU:
• Functions as the network bridge for multipoint calls between H.323, SIP
and TIP endpoints.
• The Collaboration Server can be interfaced to CUCM using a SIP trunk,
enabling CTS to join multipoint calls on Collaboration Server. Signaling
goes through the CUCM while the media in TIP format goes directly
between the CTS and Collaboration Server.
• The Collaboration Server must be configured to route outbound SIP calls
to DMA.
• Collaboration Server must be configured to send and receive RTP
streams to and from the Service Provider's SBC.
Multipoint Layout Application
Required for managing multi-screen endpoint layouts for Cisco CTS 3XXX,
Polycom TPX, RPX or OTX systems.
Telepresence, desktop and room systems.
• Polycom SIP endpoints must register to DMA as SIP Proxy.
851