Creating Multiple Virtual Recording Rooms On The Rss; Configuring The Collaboration Server To Enable Recording; Defining The Recording Link - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide

Creating Multiple Virtual Recording Rooms on the RSS

If the environment includes a Polycom® RSS™ 4000 Version 8.5 Recording and Streaming Server (RSS)
and you want to associate Recording Links on the Collaboration Server with Virtual Recording Rooms
(VRR), created and saved on the Polycom® RSS™ 4000 Version 8.5 perform the following operations on
the RSS:
1 Modify the parameters of a recording Template to meet the recording requirements.
2 Assign the modified recording Template to a VRR. The recording and streaming server will assign a
number to the VRR.
3 Repeat step and step
1
For more information see the RSS 4000 User Guide.
Configuring the Collaboration Server to Enable
Recording
To make recording possible the following components you must be configured on the Collaboration Server:
● Recording Link – defines the connection between the conference and the recording system.
● Recording-enabled Conference IVR Service – recording DTMF codes and messages must be set in
the Conference IVR Service to enable "recording-related" voice messages to be played and to allow
the conference chairperson to control the recording process using DTMF codes.
● Recording-enabled Profile – recording must be enabled in the Conference Profile assigned to the
recorded conference.
If Multiple Recording Links are being defined for Virtual Recording Rooms (VRRs), created and saved on
the Polycom® RSS™ 4000 Version 8.5, the MAXIMUM_RECORDING_LINKS System Flag in system.cfg
can be modified to determine the number of Recording Links available for selection.
● Range: 20 - 100
● Default: 20
The flag value can be modified by selecting the System Configuration option from the Setup menu. For more
information, see Modifying System

Defining the Recording Link

The Recording Link is defined once and can be updated when the H.323 alias or the IP address (of the
recording system) is changed. Only one Recording Link can be defined in the Collaboration Server. Its type
must be H.323.
In Multiple Networks Configuration, Recording Links use the default Network Service to connect to
conferences, therefore the recording system must be defined on the default IP Network Service to
enable the recording.
To define a Recording Link:
1 In the RMX Management pane, click Recording Links (
Polycom®, Inc.
for each VRR to create additional VRRs.
2
Flags.
).
377