Table of Contents
Advertisement
37 Click Save & Close.
38 In the Success Message box, click OK.
39 In the Reset Confirmation dialog box, click Yes.
40 In the Please wait for system reset message box, click OK.
System restart may take up to five minutes.
41 Refresh the browser periodically until the Login screen is displayed.
42 When the Login screen is displayed, enter your Username and Password and click Login.
Procedure 4: Enable Ultra Secure Mode
The Ultra Secure Mode is disabled by default and can be enabled by changing the value of the
ULTRA_SECURE_MODE System Flag to YES using the Setup > System Configuration
menu. After modifying the value of the ULTRA_SECURE_MODE System Flag to YES, all
RMX users are forced to change their Login passwords.
To enable Ultra Secure Mode:
1
2
3
4
5
6
7
8
System restart may take up to five minutes.
Polycom, Inc.
The RMX confirms successful configuration.
On first entry, the default Username and Password are both POLYCOM.
The system is now fully configured and if there are no System Errors, the green RDY
LED on the CNTL module on the RMX's front panel turns ON.
On the RMX menu, click Setup > System Configuration.
The System Flags dialog box is displayed.
Locate and double-click on the ULTRA_SECURE_MODE System Flag entry.
The Update Flag Value dialog box is displayed.
In the New Value field, enter YES.
Click the OK button to close the Update Flag Value dialog box.
The user is warned that enabling Ultra Secure Mode is reversible only by performing a
Restore to Factory Defaults.
Click the Yes button to confirm.
Click the Close button to close the System Flags dialog box.
In the Reset Confirmation dialog box, click Yes.
In the Please wait for system reset message box, click OK.
Chapter 1-First Time Installation and Configuration
1-45
Advertisement
Table of Contents
