Polycom RealPresence 800s Administrator's Manual page 425

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
IP Network Service - IP Parameters
Field
Network Service
Name
IP Network Type
Signaling Host IP
Address
Media Card IP
address
Subnet Mask
4 Optional. Some system flags can be defined per Network Service, depending on the network
environment.
To modify these flags, click the Service Configuration button.
Polycom®, Inc.
Description
Enter the IP Network Service name.
Note: This field is displayed in all IP Signaling dialog boxes and can contain
character sets that use Unicode encoding.
Select the IP Network environment. You can select:
• H.323: For an H.323-only Network Service.
• SIP: For a SIP-only Network Service.
• H.323 & SIP: For an integrated IP Service. Both H.323 and SIP participants can
connect to the Collaboration Server using this service.
Note: This field is displayed in all Default IP Service tabs.
This field is disabled as only one IP address is used for the signaling.
If each of LAN ports designated for signaling and media (LAN2, LAN3 and LAN4)
on the system can be used with a different network, each port is assigned to its own
Network Service.
In such a case, enter the IP address of the port to be assigned to this Network
Service.
A LAN port that is already assigned to a different Network Service, displays the IP
Address of the assigned port and it cannot be assigned to this Network Service (it is
disabled).
Enter the subnet mask of the Collaboration Server in that network service.
Default value: 255.255.255.0.
439