Enabling Encryption At The Participant Level - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
 Encrypt All - Encryption is enabled for the conference and all conference participants must be
encrypted.
 No Encryption - Encryption is disabled for the conference.
 Encrypt when possible - enables the negotiation between the MCU and the endpoints and let
the MCU connect the participants according to their capabilities, where encryption is the preferred
setting. For connection guidelines see
Conference
For more information about recording encrypted conferences, see

Enabling Encryption at the Participant Level

You can select the encryption mode for each of the defined participants. Encryption options are affected by
the settings of the flag in the system configuration. Undefined participants are connected with the Participant
Encryption option set to Auto, inheriting the conference/Entry Queue encryption setting.
To enable encryption at the participant level:
» In the Participant Properties – Advanced dialog box, in the Encryption list, select one of the
following options: Auto, On, or Off.
Polycom®, Inc.
.
Mixing Encrypted and Non-encrypted Endpoints in one
Recording Link Encryption .
179