Modifying The Management Network In The Realpresence Collaboration Server 800S - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
On the RealPresence Collaboration Server Virtual Edition with DHCP available, the Default IP Service
parameters are automatically set during First Time Power-up and whenever the Collaboration Server is
restarted. On the RealPresence Collaboration Server Virtual Edition without DHCP available, the Default IP
Service properties must be set manually. For more information, see the Polycom® RealPresence
Collaboration Server 800s/Virtual Edition Getting Started Guide,
Changes made to any of these parameters only take effect when the Collaboration Server is reset. An
Active Alarm is created when changes made to the system have not yet been implemented and the
MCU must be reset.
Modifying the Management Network in the RealPresence Collaboration
Server 800s
The Management Network parameters need to be modified if you want to:
● Connect directly to the Collaboration Server from a workstation
● Modify routes
● Modify DNS information
To view or modify the Management Network Service:
1 In the RMX Management pane, click the IP Network Services (
2 In the IP Network Services list pane, double-click the Management Network (
The Management Network Properties - IP dialog box opens.
3 Modify the following fields:
RealPresence Collaboration Server 800s - Default Management Network Service – IP
Field
Network Service Name
IP Version
Polycom®, Inc.
Description
Displays the name of the Management Network. This name cannot be modified.
Note: This field is displayed in all Management Network Properties tabs.
IPv4
IPv6
IPv4 & IPv6
Manual IP Configuration.
) button.
Select this option for IPv4 addressing only.
Select this option for IPv6 addressing only.
Select this option for both IPv4 and IPv6 addressing.
Note: If the gatekeeper cannot operate in IPv6
addressing mode, the H323_RAS_IPV6 System Flag
should be set to NO.
For more information see
CS_MODULE_PARAMETERS
) entry.
Manually Added Flags -
Tab.
399