Polycom RealPresence 800s Administrator's Manual page 625

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Manually Added, Modified, Deleted System Flags
Flag
PRESERVE_PARTY_CELL_ON_
FORCE_LAYOUT
QOS_IP_AUDIO
QOS_IP_VIDEO
QOS_MANAGEMENT_NETWOR
K
REDUCE_CAPS_FOR_REDCOM
_SIP
REDIAL_INTERVAL_IN_SECON
DS
REDUCE_CAPS_FOR_REDCOM
_SIP
REJECT_INCORRECT_PRECED
ENCE_DOMAIN_NAME
Polycom®, Inc.
Description
Used to prevent reassignment of cells in a forced layout that were
assigned to endpoints that have disconnected, paused their video, or
have been removed from the conference. The cell will remain black
until the endpoint reconnects or a new layout is used, or the
conference ends.
Range: YES / NO
Default: NO
• NO - Cells of dropped endpoints are reassigned. Endpoints that
reconnect will be treated as new endpoints.
• YES - Cells of dropped endpoints are not reassigned, but will be
reserved until the endpoint reconnects.
For information see the Polycom® RealPresence Collaboration Server
800s/Virtual Edition Getting Started
Participant Call.
Used to select the priority of audio packets when DiffServ is the is the
selected method for packet priority encoding.
Default: 0x31
Used to select the priority of video packets when DiffServ is the is the
selected method for packet priority encoding.
Default: 0x31
Enter the DSCP value for the RMX Management Network.
Default: 0x10
Range: 0x00 - 0x3F
To accommodate deployments where some devices have limits on the
size of the SDP payload in SIP messages (such as LSCs from Redcom
running older software versions), when the flag value = YES, the SDP
size is less than 2kb and includes only one audio and one video media
line.
Default: NO
Enter the number of seconds that the Collaboration Server should wait
before successive re dialing attempts.
Range: 0-30 (Default: 10)
To accommodate Redcom's SDP size limit, when the flag value = YES,
the SDP size is less than 2kb and includes only one audio and one
video media line.
Default: NO
When set to YES, when the Precedence Domain of a SIP dial-in call
does not match the Precedence Domain of the RMX, the call is
rejected. Possible values: YES/NO
Default: No
Guide, Force Layout and Preserve
639