Polycom RealPresence 800s Administrator's Manual page 656

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Active Alarms
Alarm Code
Encryption Server Error. Failed to
generate the encryption key
Error in external database certificate
Error reading MCU time
eUserMsgCode_Cs_EdgeServerDnsF
ailed
eUserMsgCode_Cs_SipTLS_Certificat
eHasExpired
eUserMsgCode_Cs_SipTLS_Certificat
eSubjNameIsNotValid_Or_DnsFailed
eUserMsgCode_Cs_SipTLS_Certificat
eWillExpireInLessThanAWeek
eUserMsgCode_Cs_SipTLS_FailedTo
LoadOrVerifyCertificateFiles
eUserMsgCode_Cs_SipTLS_Registrat
ionHandshakeFailure
eUserMsgCode_Cs_SipTLS_Registrat
ionServerNotResponding
Event Mode Conferencing resources
deficiency due to inappropriate license.
Please install a new license
External NTP servers failure
Failed to access DNS server
Failed to configure the Media card IP
address
Failed to configure the Users list in
Linux
Failed to connect to application server
Polycom®, Inc.
Alarm Description
FIPS 140 test failed while generating the new encryption key.
Failed to read MCU time configuration file ([status]).
Manually configure the MCU Time in the Collaboration Server Web Client
or RMX Manager Manager application.
The MCU could not connect to any of the defined NTP server for
synchronization due to the remote server error or network error or
configuration error.
Change the configuration of the NTP server.
Failed to access DNS server.
Possible reasons for the failure:
• Failure type: [OK Or Not supported.
• Does not exist Or IP failure.
• Duplicate IP Or DHCP failure.
• VLAN failure Or Invalid: [status_Number].
The authentication process did not start.
Use the Restore to factory Defaults to recover.
Possible reasons for the failure:
• Failed to connect to application server:
• Failed to establish connection to server, url = [url].
670