Defining Avc Cp Conferencing Profiles - Polycom RealPresence 800s Administrator's Manual

Defining AVC-Based Conference Profiles
In the RealPresence CloudAxis Solution, the Conference Profiles are defined in the RealPresence
DMA system component and should not be defined directly in the RealPresence Collaboration
Server 800s/Virtual Edition component.
AVC-based Conference Profile options differ according to the selected Conferencing Mode. To facilitate the
definition process of a new Profile, the system displays default values for each parameter so you need only
to modify the required settings.

Defining AVC CP Conferencing Profiles

When defining a new Profile, you select the parameters that determine the video display on the participant's
endpoint, the quality of the video, content sharing parameters, whether the conference will be recorded,
encryption, Telepresence mode and other conferencing parameters.
The following parameters are defined:
New AVC CP Profile - General Parameters
●
New AVC CP Profile - Advanced Parameters
●
New AVC CP Profile - Gathering Settings Parameters
●
New AVC CP Profile - Video Quality Parameters
●
New AVC CP Profile - Video Settings Parameters
●
New AVC CP Profile - Audio Settings Parameters
●
New AVC CP Profile - IVR Parameters
●
New AVC CP Profile - Recording Parameters
●
New AVC CP Profile - Site Names Parameters
●
New AVC CP Profile - Message Overlay Parameters
●
New AVC CP Profile - Network Services Parameters
●
To define a new CP Profile:
1 In the RMX Management pane, click Conference Profiles.
2 In the Conference Profiles pane, click the New Profile button.
Polycom®, Inc. 69