Terminal Connections To Siemens Integrators; Terminal Connections To Siwarex Ftc Integrator - Siemens sitrans WS100 Instruction Manual

Black – Common
The common connection used as a reference point with the integrator.
GND – Ground
A ground connection. Do not use this ground for the cable shield.
Notes:
• Ground the cable shield at the integrator end only!
• For optimal performance the stainless steel cover of the Speed Sensor must
be connected to a reliable earthed ground.

Terminal Connections to Siemens Integrators

SITRANS WS100
Milltronics BW100
Milltronics BW500

Terminal Connections to SIWAREX FTC Integrator

SITRANS WS100
SIWAREX FTC
Notes:
• N/C indicates the terminal is not normally connected
• For terminal connections to older model Siemens integrators consult your local
Siemens representative
Page 12 SITRANS WS100 Speed Sensor – INSTRUCTION MANUAL
Red White
+V DC Speed
8 7
19 16
Red White
+V DC Speed
24 V
X1.9
(backplane
(CI+)
bus)
Black
GND
Cmn
6 N/C
17 N/C
Black
GND
Cmn
X1.10
N/C
(CI-)
7ML19985LU01