At+Cgsms Select Service For Mo Sms Messages - Siemens MC35 Command Set

AT Command Set

6.1.7 AT+CGSMS Select service for MO SMS messages

Test command
AT+CGSMS=?
Read command
AT+CGSMS?
Write command
AT+CGSMS=
[<service>]
Reference
GSM 07.07
MC35_ATC_01_V05.00
The test command lists the services and service preferences which can be
selected with the AT+CGSMS write command.
Response
+CGSMS: (list of supported <service>s
OK
Parameter
<service> See write command
The read command returns the currently selected service or service prefer-
ence.
Response
+CGSMS: <service>
OK/ERROR/+CME ERROR
<service> See write command
The write command specifies what service or service preference the MT
shall use when sending MO SMS messages. If parameter <service> is not
given, the current value remains unchanged.
Parameter
<service> a numeric parameter which indicates the service or service
preference to be used.
0 GPRS
1 circuit switched
2 GPRS preferred (use circuit switched if mobile is not
GPRS attached or during a CS call)
3 circuit switched preferred (use GPRS if circuit switched is
not available)
Response
OK/ERROR/+CME ERROR
Note:
· Default value is 3 (circuit switched preferred).
·
Parameter cannot be stored to user profile (AT&W).
Page 172 of 256 15.07.2002