Trigger:glitch:source - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:TRIGger:GLITch:SOURce

Command Syntax
:TRIGger:GLITch:SOURce <source>
<source> ::= {DIGital<d> | CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :TRIGger:GLITch:SOURce command selects the channel that produces
the pulse width trigger.
Query Syntax
:TRIGger:GLITch:SOURce?
The :TRIGger:GLITch:SOURce? query returns the current pulse width
source. If all channels are off, the query returns "NONE".
Return Format
<source><NL>
See Also •
•
•
•
•
•
Example Code
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 886
":TRIGger:GLITch:LEVel"
":TRIGger:GLITch:POLarity"
":TRIGger:GLITch:QUALifier"
":TRIGger:GLITch:RANGe"
"Example Code" on page 906
on page 877
on page 911
on page 912
on page 913
on page 914
31
:TRIGger Commands
915