BGP Commands
config bgp peer-group send-community
config bgp peer-group <peer group> [send-community | dont-send-community]
Description
Configures whether communities should be sent to neighbors as part of route updates.
Syntax Description
peer group
send-community
dont-send-community
Default
N/A.
Usage Guidelines
These settings apply to the peer group and all neighbors of the peer group.
You can use BGP peer groups to group together up to 200 BGP neighbors. All neighbors within the peer
group inherit the parameters of the BGP peer group. The following mandatory parameters are shared
by all neighbors in a peer group:
• remote AS
• source-interface
• out-nlri-filter
• out-aspath-filter
• out-route-map
• send-community
• next-hop-self
Example
The following command configures communities to be sent to neighbors as part of route updates:
config bgp peer-group external send-community
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all "i" series platforms.
1078
Specifies a peer group.
Specifies that communities are sent to neighbors as part of route updates.
Specifies that communities are not sent to neighbors as part of route updates.
ExtremeWare Software 7.0.0 Command Reference Guide