Extreme Networks ExtremeWare Command Reference Manual page 697

Example
The following command displays detailed EAPS information for domain "eaps2":
show eaps eaps2 detail
The results for domain "eaps2" on a master node are shown as follows:
Name: "eaps2" (instance=0)
State: Complete
Enabled: Yes
Primary port: 14
Secondary port: 13
Hello Timer interval: 1 sec
Eaps Domain has following Controller Vlan:
Vlan Name
"rhsc"
EAPS Domain has following Protected Vlan(s):
Vlan Name
"blue"
"traffic"
Number of Protected Vlans: 2
The following command displays detailed EAPS information:
show eaps detail
The results for a transit node are shown as follows:
EAPS Enabled: Yes
Number of EAPS instances: 1
EAPSD-Bridge links: 2
Name: "eaps1" (instance=0)
State: Links-Up
Enabled: Yes
Primary port: 13
Secondary port: 14
Hello Timer interval: 1 sec
Preforwarding Timer interval: 3 sec
Last update: From Master Id 00:E0:2B:81:20:00, Sat Mar 17 17:03:37 2001
Eaps Domain has following Controller Vlan:
Vlan Name
"rhsc"
EAPS Domain has following Protected Vlan(s):
Vlan Name
"traffic"
Number of Protected Vlans: 1
The following command displays EAPS information:
show eaps eaps2
The results for a transit node are shown as follows:
Name: "eaps2" (instance=1)
State: Link-Down
Enabled: Yes
Primary port: 3
Secondary port: 2
ExtremeWare Software 7.0.0 Command Reference Guide
[Running: Yes]
Mode: Master
Port status: Up
Port status: Blocked
Fail Timer interval: 3 sec
VID
0020
VID
1003
1001
[Running: Yes]
Mode: Transit
Port status: Up
Port status: Up
Fail Timer interval: 3 sec
VID
0020
VID
1001
[Running: Yes]
Mode: Transit
Port status: Down
Port status: Up
Tag status: Tagged
Tag status: Tagged
Tag status: Tagged
Tag status: Tagged
Tag status: Tagged
Tag status: Tagged
show eaps
697