Config Debug-Trace Ipxgns-Message - Extreme Networks ExtremeWare Command Reference Manual

config debug-trace ipxgns-message

config debug-trace ipxgns-message <debug level> vlan <vlan name>
Description
This command records debug information to the syslog.
Syntax Description
debug level
vlan name
Default
The default level is 0.
Usage Guidelines
The
debug level
the messages recorded at lower levels.
Example
The following command sets the reporting level for IPX GNS message errors to 3:
config debug-trace ipxgns-message 3
Following is the log output at this level:
<DBUG:XSAP> SAP Traverse: Stuffing entry into packet
<DBUG:XSAP> SAP Traverse: Ignoring type 0278
<DBUG:XSAP> SAP Traverse: Ignoring type 026b
<DBUG:XSAP> SAP Traverse: Ignoring type 0640
<DBUG:XSAP> SAP Traverse: Ignoring type 0278
<DBUG:XSAP> SAP Traverse: Ignoring type 026b
<DBUG:XSAP> SAP Traverse: Ignoring type 0640
<DBUG:XSAP> type 0004 net: 3646f895 mac: 00:90:27:a1:44:3c socket: 1105
<DBUG:XSAP> SAP Traverse: Stuffing entry into packet
<DBUG:XSAP> last message repeated 9 times
<DBUG:XSAP> Rcv bcast GNS type(3) from (f0003606, 00:a0:c9:59:a4:5e) for service=0x4
History
This command was first available in ExtremeWare 6.1.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a debug level:
0 — None.
1 — None.
2 — Verifies that IPX GNS messages are being sent and received.
3 — Verifies the contents of the messages.
4 — No additional information recorded.
5 — No additional information recorded.
Specifies a VLAN name.
range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
config debug-trace ipxgns-message
1503