T1, E1, and T3 WAN Commands
show ports configuration
show ports <portlist> [t1 | e1 | t3] configuration
Description
Displays the port configuration and status.
Syntax Description
portlist
A list of ports.
Default
N/A.
Usage Guidelines
If you do not specify a port number or range of ports, configuration and status are displayed for all
ports.
Example
The following command displays the T1 configuration and status of one port:
show ports 4:1 t1 configuration
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
E1 support was added in ExtremeWare v6.1.8w3.0.1b56 WAN technology release.
T3 support was added in ExtremeWare v6.1.8w3.0.1b61 WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
1362
ExtremeWare Software 7.0.0 Command Reference Guide