Enable Cpu-Dos-Protect Simulated - Extreme Networks ExtremeWare Command Reference Manual

enable cpu-dos-protect simulated

enable cpu-dos-protect simulated
enable cpu-dos-protect simulated
Description
Enables simulated denial of service protection.
Syntax Description
There are no arguments or variables for this command.
Default
Default is disabled.
Usage Guidelines
When simulated denial of service protection is enabled, no ACLs are created. This mode is useful to
gather information about normal traffic levels on a switch. This will assist in configuring denial of
service protection so that legitimate traffic is not blocked.
Example
The following command enables simulated denial of service protection.
enable cpu-dos-protect simulated
History
This command was first available in ExtremeWare 6.2.2
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide 643