Extreme Networks ExtremeWare Command Reference Manual page 1520

Troubleshooting Commands
<DBUG:MSIG> => NewSt:DU_DORMANT
<DBUG:MSIG> => SESS: 10.0.1.1 0 Peer: 10.3.1.1 0
<DBUG:MSIG> DOWN_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> => NewSt:ESTABLISHED
<DBUG:MSIG> => SESS: 10.0.1.1 0 Peer: 10.3.1.1 0
<DBUG:MSIG> DOWN_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> SESS: 10.0.2.1 0 Peer: 100.100.61.1 0 NewSt:OPERATIONAL
EV:OTHER_MSG_RX
<DBUG:MSIG> => NewSt:IDLE
<DBUG:MSIG> => NH: 10.0.1.2 (4) SESS: 10.0.2.1 0 Peer: 100.100.61.1 0
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> => NewSt:UPS_RLS_AWT
<DBUG:MSIG> => NH: 10.0.1.2 (4) SESS: 10.0.2.1 0 Peer: 100.100.61.1 0
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> => NH: 10.0.1.2 (4) NewNH_NoRouteToDestination (0x2) SESS: 10.0.2.1 0
Peer: 100.100.61.1 0
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> => NH: 10.0.1.2 (4) NewSt:IDLE
<DBUG:MSIG> ING_UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> => NH: 10.0.1.2 (4) NewNH_NoRouteToDestination (0x2)
<DBUG:MSIG> ING_UP_FSM: FEC: 10.3.1.1/32
<DBUG:MSIG> => NewSt:ESTABLISHED
<DBUG:MSIG> => NH: 10.0.1.2 (4) SESS: 10.0.2.1 0 Peer: 100.100.61.1 0
<DBUG:MSIG> UP_FSM: FEC: 10.3.1.1/32
History
This command was first available in an ExtremeWare IP Technology Services Release based on
ExtremeWare v6.1.8b12.
Platform Availability
This command is available on the MPLS module.
1520
OldSt:ESTABLISHED EV:INT_DEL_UPS
OldSt:ESTABLISHED EV:INT_DEL_UPS
OldSt:UPS_RLS_AWT
OldSt:ESTABLISHED
OldSt:EST
OldSt:RESP_AWAITED
OldSt:OPERATIONAL
EV:RELEASE_REQ
EV:RTE_RECOMP_REQ
EV:RTE_RECOMP_REQ
EV:INT_DNS_MAP
ExtremeWare Software 7.0.0 Command Reference Guide