Config Ospf Lsa-Batching-Timer - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

config ospf lsa-batching-timer

config ospf lsa-batching-timer <timer_value>
Description
Configures the OSPF LSA batching interval.
Syntax Description
timer_value Specifies a time in seconds.
Default
The default setting is 30 seconds.
Usage Guidelines
The range is between 0 (disabled) and 600 seconds, using multiples of 5 seconds. The LSAs added to the
LSDB during the interval are batched together for refresh or timeout.
Example
The following command configures the OSPF LSA batching timer to a value of 100 seconds:
config ospf lsa-batching-timer 100
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on "i" series platforms.
942 ExtremeWare Software 7.0.0 Command Reference Guide