config mpls rsvp-te add lsp
config mpls rsvp-te add lsp <lsp_name> path <path_name> {<profile_name>}
{primary | secondary}
Description
Adds an RSVP-TE LSP.
Syntax Description
lsp_name
path_name
profile_name
primary
secondary
Default
N/A.
Usage Guidelines
Both the
<lsp_name>
string that is to be used to identify the LSP within the switch. The
an alphabetic character and can contain up to 31 additional alphanumeric characters. The
<profile_name>
specified, the
is configured. The maximum number of configurable LSPs is 1024.
Example
The following command adds a primary RSVP-TE LSP that takes the routed path named
paththroughdenver:
config mpls rsvp-te add lsp lsptonyc path paththroughdenver
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the LSP name.
Specifies the path name
Specifies the profile name.
Specifies the primary LSP.
Specifies a secondary LSP.
and
<path_name>
is optional. If omitted, the default profile is applied to the LSP. If no explicitly
defaults to the primary path. The LSP is immediately signaled as soon as it
<path_name>
must be specified. The
<lsp_name>
config mpls rsvp-te add lsp
parameter is a character
string must begin with
<lsp_name>
1387