Config Ospf Area Normal - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

config ospf area normal

config ospf area <area identifier> normal
Description
Configures an OSFP area as a normal area.
Syntax Description
area identifier Specifies an OSPF area.
Default
Normal.
Usage Guidelines
A normal area is an area that is not any of the following:
• Stub area
• NSSA
Virtual links can be configured through normal areas. External routes can be distributed into normal
areas.
Example
The following command configures an OSPF area as a normal area:
config ospf area 10.1.0.0 normal
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
932 ExtremeWare Software 7.0.0 Command Reference Guide