Config Pim Timer Vlan - Extreme Networks ExtremeWare Command Reference Manual

config pim timer vlan

config pim timer <hello interval> <join prune interval> vlan [<vlan name>]
Description
Configures the global PIM timers.
Syntax Description
hello interval
join prune interval
vlan name
Default
• hello interval—30 seconds.
• join prune interval—60 seconds.
Usage Guidelines
None.
Example
The following command configures the global PIM timers on the VLAN accounting:
config pim timer 150 300 vlan accounting
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the amount of time before a hello message is sent out by the PIM
router. The range is 1 to 65,519 seconds.
Specifies the join/prune interval. The range is 1 to 65,519 seconds.
Specifies a VLAN name.
config pim timer vlan
1153