Disable Bgp Neighbor Soft-In-Reset - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

disable bgp neighbor soft-in-reset

disable bgp neighbor [all | <ip address>] soft-in-reset
Description
Disables the soft input reset feature.
Syntax Description
all
ip address
Default
N/A.
Usage Guidelines
Disabling the soft input reset feature can potentially limit the amount of system memory consumed by
the RIB-in.
Example
The following command disables the soft input reset feature:
disable bgp neighbor 192.168.1.17 soft-in-reset
History
This command was available in ExtremeWare 6.2.
Platform Availability
This command is available on all "i" series platforms.
1104
Specifies all neighbors.
Specifies an IP address.
ExtremeWare Software 7.0.0 Command Reference Guide