Config Vrrp Vlan Authentication - Extreme Networks ExtremeWare Command Reference Manual

VRRP Commands

config vrrp vlan authentication

config vrrp vlan <vlan name> authentication [none | simple-password <simple
password>]
Description
Configures VRRP authentication.
Syntax Description
vlan name
none
simple password
Default
N/A.
Usage Guidelines
None.
Example
The following command configures authentication for VRRP VLAN vrrp-1 with the password
config vrrp vlan vrrp-1 authentication simple-password newvrrp
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the "i" series platforms.
778
Specifies the name of a VRRP VLAN.
Specifies that no password is required.
Specifies the password for VRRP authentication. The maximum password
length is eight characters.
newvrrp
ExtremeWare Software 7.0.0 Command Reference Guide
: