Config Isis Lsp Refresh Interval - Extreme Networks ExtremeWare Command Reference Manual
Version 7.0.0
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages)
Table of Contents
Advertisement
IGP Commands
config isis lsp refresh interval
config isis lsp-refresh-interval <seconds>
Description
Configures the LSP refresh interval.
Syntax Description
seconds
Specifies the LSP refresh interval in seconds.
Default
900 seconds.
Usage Guidelines
You can only use this command when IS-IS is disabled.
The LSP refresh interval range is from 100 to 65,235 seconds.
Example
The following command configures the LSP refresh interval:
config isis lsp-refresh-interval 120
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the "i" series platforms.
908
ExtremeWare Software 7.0.0 Command Reference Guide
Advertisement
Table of Contents
Related Manuals for Extreme Networks ExtremeWare
Related Products for Extreme Networks ExtremeWare
- Extreme Networks ExtremeWare XOS Command
- Extreme Networks ExtremeWare Enterprise Manager
- Extreme Networks EPICenter Guide
- Extreme Networks ExtremeXOS ScreenPlay
- Extreme Networks ExtremeWireless AP460i
- Extreme Networks ExtremeWireless AP460e
- Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-DC
- Extreme Networks ExtremeSwitching 3600 Series
- Extreme Networks ExtremeSwitching ISW Series
- Extreme Networks ExtremeSwitching X440-G2-12t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12p-10GE4
- Extreme Networks ExtremeSwitching X440-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12t8fx-GE4
- Extreme Networks ExtremeSwitching X450-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X620-10x
- Extreme Networks ExtremeCloud NMS-A-25
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?