Extreme Networks ExtremeWare Command Reference Manual page 1523

config debug-trace ospf-hello
12.47 <DBUG:KERN> 0x088649b374: ca 8c 00 00 00 00 00 00 00 00 00 00 ff ff ff 00
****************
<DBUG:KERN> 0x088649b364: e0 00 00 05 02 01 00 30 03 03 03 03 00 00 00 00
*******0********
<DBUG:KERN> 0x088649b354: 45 c0 00 30 40 4e 00 00 01 59 83 4a 0f 01 06 03
E**0@N***Y*J****
<DBUG:KERN> m0 @ 0x8649b300: Length=68 m_off=84 m_data=0x8649b354
<DBUG:KERN> <--- Start of chain (8649b300) --->
<DBUG:OSPF> (66235) Received Hello packet from 15.1.6.3 to 224.0.0.5, len 48 proto 89
<DBUG:KERN> 0x08869c5470: 64 64 02 03 dd**
<DBUG:KERN> 0x08869c5460: 00 0a 02 01 00 00 00 28 0f 02 01 01 0f 02 01 02
*******(********
<DBUG:KERN> 0x08869c5450: 74 2a 00 00 00 00 00 00 00 00 00 00 ff ff ff 00
t***************
<DBUG:KERN> 0x08869c5440: e0 00 00 05 02 01 00 30 01 01 01 01 00 00 00 00
*******0********
<DBUG:KERN> 0x08869c5430: 00 c0 00 44 00 00 00 00 00 59 00 00 00 00 00 00
***D*****Y******
<DBUG:OSPF> (66233)Sending Hello pkt(0x869c5430) len 68 to 224.0.0.5 if rif5
<DBUG:KERN> <--- End of chain (86498a00) --->
<INFO:SYST> msm-a-console admin: configure debug-trace ospf-hello 0 vlan all
<INFO:SYST> msm-a-console admin: clear log static
<INFO:SYST> Log cleared
<INFO:SYST> msm-a-console admin: configure debug-trace ospf-hello 4 vlan all
<DBUG:OSPF> (66336)Sending Hello pkt(0x869c5430) len 68 to 224.0.0.5 if rif3
<DBUG:OSPF> (66335) Received Hello packet from 15.1.6.3 to 224.0.0.5, len 48 proto 89
<DBUG:OSPF> (66333)Sending Hello pkt(0x869c5430) len 68 to 224.0.0.5 if rif5
<DBUG:OSPF> (66332) Received Hello packet from 15.1.4.2 to 224.0.0.5, len 48 proto 89
<DBUG:OSPF> (66332)Sending Hello pkt(0x869c5430) len 68 to 224.0.0.5 if rif2
<DBUG:OSPF> (66330) Received Hello packet from 15.2.1.2 to 224.0.0.5, len 48 proto 89
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide 1523